温度保险丝术语解释
温度保险丝术语解释/EXPLANATION OF TERMS
¤ TF-额定动作温度/TF-Rated functioning temperature
在仅通以不超过10mA的探测电流的条件下,测得的使热熔断体导电状态改变的温度。
Temperature of the thermal-link which causes it to change its state of conductivity with a detection up to 10mA as the only load.
¤ 实测动作温度/Fusing-off temperature
产品放置油槽内并通过以不超过100mA电流值,然后以0.5K/min 至1K/min 的速度稳定升温,热熔断体实际动作温度体。
The fusing-off temperature indicates value measured in the test oil bath and temperature be increased steadily with a rate of rise between 0.5K/min to 1K/min and detective current 0.1 ampere or less.
¤ TH-保持温度/TH-Holding temperature
热熔断体在规定的条件下通过额定电流且保温168小时,其导电状态不发生改变的最高温度值或按IEC60691标准测试值。
The maximum temperature at which a thermal-links will not cause a change in start of conductivity to open circuit while conducting rated current for 168 hours or according to IEC60691.
¤ TM-最高极限温度/TM-Maximun temperature limit
由制造厂规定的温度,在此温度下热熔断体(温度保险丝)导电状态已改变,但其机械性能和电气性能在规定的时间内不致减弱。
Temperature of the thermal-link stated by the manufacturer, Up to which the machanical and electrical properties of the thermal-link, Having changed its state of conductivity , Will not beimpaired for a given time.
¤ 熔断器盒/Fusr-holder
熔断器底座和熔断器承载体的组合件。
Combination of a fuse-bade whith its fuse-carrier.
¤ 小型熔断器/Miniature fuse
其中的熔断元件是小型熔断体的一种熔断器。
Fuse in which the fuse-link is a miniature fuse-link.
扫一扫关注微信公众帐号